What is the connection type of the mobile broadband WAN port? How to set up WIFI after installing mobile broadband?

At present, most residents have installed wireless routers in their homes, so the wireless network environment is very complex, which often causes channel congestion, which will cause wireless instability and lag in the home. If we encounter the above problems during use, we can try to check the problems mentioned in the article below so that you can find the root cause and surf the Internet unimpeded.

Contents of this article

1. What is the connection type of the mobile broadband WAN port?

2. How to set up WIFI after installing mobile broadband

3. The problem of slow fiber broadband speed

What is the connection type of the mobile broadband WAN port?

There are three options for the WAN port: PPPOE, Static IP, and Dynamic IP. The connection type should be selected based on the type of broadband access to the user.

1. If the broadband access is ADSL, the WAN port connection type should be PPPOE, because this connection method requires users to enter an account name and password when connecting.

Second, the network access is a dedicated line, and a static IP address must be used. This type of network is generally used by units.

3. ADSL is upgraded to fiber-to-the-home. When connecting to the Internet, there is no need to enter an account name and password. At this time, the WAN port connection type is selected as dynamic IP.

Compared with traditional access methods, PPPOE has a higher cost-effectiveness. The currently popular broadband access method is ADSL.

How to set up WIFI after installing mobile broadband

1. Connect the home network cable to the WAN port of the router.

2. Use another network cable to connect one end to the computer and the other end to the router LAN interface.

3. Open the computer's browser and enter the router login IP address in the address bar.

4. Enter the router login account and password in the pop-up dialog box. The router login account and password can be found on the back of the router.

5. After entering the router setting interface, the computer will pop up a quick setting interface. In this interface, select PPPoE as the broadband dial-up mode and enter the Internet account and password.

6. After the settings are completed, save and exit, and restart the router.

The problem of slow fiber broadband speed

1. Wireless channel congestion. If most residents have wireless routers installed in their homes, the wireless network environment is very complex, which often causes channel congestion, which can cause wireless instability and freezes at home. If you encounter this situation, you might as well try changing to a channel with fewer access points, because changing the channel can avoid interference caused by other devices.

2. The router is too old. Just like your mobile phone, the router also needs to be updated in time, otherwise the hardware will not keep up, and no matter how high the bandwidth is, it will not bring smooth Internet speed.

3. The location of the router is unreasonable. An unreasonable location of the router will affect the wireless network speed.