What can be added to Coke to clean the range hood? What can be added to baking soda to remove oil stains from the range hood?

The range hood is easy to use and convenient, but it is too troublesome to clean. For those who don’t want to exercise now, today we will teach you some tips to easily wipe off the stains on the range hood, including what to add to Coke to clean the range hood, what to add to baking soda to remove oil stains from the range hood, and how to prevent the range hood from odor.

Contents of this article

1. What can be added to Coke to clean the range hood?

2. What to add to baking soda to remove oil stains from range hoods

3. How to prevent the range hood from smelling bad

What can I add to Coke to clean the range hood?

Coke and toothpaste can be used to clean the range hood. Mix Coke and toothpaste together and spray them on the range hood. Then wipe it with a rag. In addition, Coke and toothpaste can also be used to clean the toilet. Mix Coke and toothpaste together and spray them on the toilet. After standing for five minutes, use a toilet brush to clean it.

Adding toothpaste to Coke can be used to clean the range hood. Mix Coke and an appropriate amount of toothpaste together and stir well. Then spray it on the range hood and wipe it with a rag to remove the grease on the range hood.

In addition, Coke and toothpaste can also clean the toilet. Spray the mixed Coke and toothpaste on the toilet, wait for five minutes, and then use a toilet brush to easily remove stains on the toilet.

When the keys at home are rusty, soak them in Coke for a day. When you take out the keys from the Coke the next day, you will see that the keys will be as bright as new and the rust on them will be completely removed.

What to add to baking soda to remove oil stains from range hoods

Baking soda and boiling water can remove oil stains from the range hood. You need to remove all the parts of the range hood and soak them in a mixture of baking soda and boiling water. After about half an hour, you can see that the oil stains are slowly dissolved. Finally, wipe the parts clean with a rag and reinstall the range hood.

Baking soda, boiling water, and a rag.

First prepare a bag of baking soda, open the package, boil a pot of water and mix the baking soda.

Gently wipe the soaked parts clean with a rag and reinstall the range hood.

How to prevent the range hood from smelling

To prevent the range hood from smelling, make sure the doors and windows are not closed tightly, which will create negative pressure and allow the smoke from other people's homes to flow in. Also, make sure the flue outlet is not installed on the side, which will make the kitchen air pressure lower than the flue pressure, causing the smoke to flow in. You can install a one-way valve at the opening of the range hood, which will open when the range hood is exhausting and close when it is not.

When the window is not open when the range hood is working, air convection cannot be formed and the fumes cannot be exhausted. When the range hood is turned on, negative pressure will be generated, and the window needs to be opened to let in outside air. If the window is closed, the air pressure in the kitchen will be lower than the flue pressure, and the fumes from other people's homes will flow back and cause odor.

Check the flue outlet position. If the flue is installed at the side auxiliary flue position, since the side flue width is only 10 cm, if the air inlet is on the side, the air discharge rate will be low. When the kitchen and flue air are convection, the kitchen air pressure will be lower than the flue air pressure, which will cause smoke and odor. Therefore, the flue should be installed on the front.

Install a one-way valve at the opening of the range hood, so that it opens when the range hood is exhausting and closes when it is not. If the smoke pipe is connected to a public flue, you can install an anti-backflow device to prevent the smoke from other people's homes from flowing back. Also pay attention to cleaning the one-way valve in time to avoid it being stuck with oil and affecting exhaust.