Which gear should I use for manual transmission climbing a hill? Will it damage the car if I put it in first gear for manual transmission climbing a hill?

There are two types of cars: manual and automatic. When encountering a relatively high slope, a manual car requires the driver to predict and then select the appropriate gear. So which gear is better for manual climbing? Will it damage the car if it is in the first gear?

Which gear should I use for climbing a hill with a manual transmission?

The key depends on the size of the slope and the displacement of the car, and it depends on the situation.

Start from the beginning of the slope, and begin to exert force from 1st gear. When you feel obvious excess power, you can shift to 2nd gear. There is still room for increasing the speed while driving by using 2nd gear, and you can definitely shift to a higher gear. Just increase or decrease the gear appropriately according to the situation.

Before going uphill, if the slope is very clear to your eyes, you can speed up down the slope. Generally, you use 3rd gear to go uphill. Some slopes can be climbed directly in 3rd gear, while some slopes require you to reduce one gear before the speed decreases. Try not to reduce gears until the vehicle cannot run anymore.

Will it damage the car if I shift into first gear while climbing a hill with a manual transmission?

Some people say that climbing a hill in first gear is very damaging to the car. This is not without reason. First gear is a high-torque gear, and the mechanical force is greater than other gears. As long as it is not used for a long time, there will not be much problem.

The gear for climbing is determined by the slope and the speed. Sometimes, the slope is too steep, and there are complicated conditions such as curves, so you have to use the first gear. This will not cause too much damage to the car. But try not to keep the accelerator pressed to the bottom and drive. This will damage the car. The first gear has its maximum speed and torque. Driving in a hasty manner will cause damage to some parts of the car.

How to shift gears when climbing a hill in a manual transmission car

Match according to the actual road conditions. Just like driving on the highway, if the road conditions are good, you can easily go up even in fifth or sixth gear.

In addition, you need to consider the slope and road conditions combined with the engine speed to match the corresponding gear. Under normal circumstances, manual transmission cars can judge whether to shift gears by the engine speed. If the engine speed is lower than 2000 rpm, you need to downshift, otherwise the power will be insufficient and it will easily stall and cause the car to slip backwards.

If the speed is higher than 3000 rpm, you need to shift up a gear, otherwise the excessive speed will cause damage to the engine.

If possible, you can also judge whether to change gears by listening to the sound of the engine based on your experience, but this requires corresponding experience.