How to install a smart toilet lid? How to place the toilet cleaner in a smart toilet

Smart toilets are becoming more and more popular and popular with homeowners during home decoration. There are three types of smart toilets on the market: one is a smart toilet with cleaning, heating, sterilization, etc., one is a smart toilet with automatic cover change, and the other is a smart toilet with automatic cover change and cleaning function. How to install a smart toilet cover? The following is a detailed sharing, I hope it will be useful to you.

Contents of this article

1. How to install the smart toilet seat

2. How to place the toilet cleaner in a smart toilet

3. How to clean a smart toilet

How to install a smart toilet seat

1. How to install the smart toilet seat

First, we need to turn off the water inlet valve of the toilet and drain the water in the toilet tank. Next, we remove the original toilet cover, align the cardboard of the smart toilet with the two installation holes of the toilet cover, and fix it with screws. Next, we align the card slot at the bottom of the smart toilet cover and push the cardboard in. After the smart toilet cover is fixed, we unplug the water inlet pipe connected to the original toilet, connect one end of the three-way connector to the water valve, and connect the other two interfaces to the water tank inlet pipe and the filter respectively. Finally, connect the filter to the water inlet of the toilet and plug in the power plug.

2. What should you pay attention to when choosing a smart toilet seat?

1. When choosing a smart toilet seat, we should pay attention to whether the shape and size of the smart toilet seat match the toilet seat, so as to avoid the situation that the smart toilet seat cannot be installed after purchase. When buying a smart toilet seat, we should pay attention to the safety of the product, for example, before buying it, we should understand clearly whether the product has anti-leakage and other installation devices.

2. There are many types of smart toilet seats on the market, including instant heating and water storage types. If our budget allows, we should try to choose instant heating toilet seats, which can keep the water temperature constant, are not limited by the amount of water, and are more comfortable. When choosing a smart toilet seat, we also need to pay attention to the functions of the smart toilet seat. The functions of a smart toilet seat are diverse, and the more functions it has, the more expensive it is. You should choose products with relevant functions according to your needs.

How to put the toilet cleaner in a smart toilet

1. The water tank of the smart toilet is on the upper back of the toilet lid. Open the plastic lid and put in the toilet cleaner. It is very simple.

2. Smart toilets originated in the United States and are used for medical and elderly care. Initially, they were equipped with a warm water cleaning function. Later, sanitary ware companies in South Korea and Japan gradually introduced technology and began to manufacture them, adding functions such as toilet seat heating, warm water cleaning, warm air drying, and sterilization. Currently, there are three types of smart toilets on the market: one is a smart toilet with cleaning, heating, sterilization, etc., one is a smart toilet with automatic cover change, and the other is a smart toilet with automatic cover change and cleaning function.

How to clean a smart toilet

1. The upper and lower parts. First, you need to separate the upper and lower parts when cleaning. Then you only need to lift the upper part gently, so that it can be easily removed and disconnected from the water source and power supply.

2. Main body. First, the seat ring and seat cover must be separated in the correct way, so that the stained parts can be thoroughly cleaned. When cleaning, remember to wipe it with a soft cloth that has been wrung dry. Do not use detergents or medicines to wipe it, otherwise it will damage the parts.

3. Filter. When dirt blocks the water inlet filter, it may cause insufficient flushing water pressure, so it must be cleaned regularly. Cleaning steps: Remember to close the water inlet valve; use special tools to unscrew the water filter; use a toothbrush or a small brush to clean the dirt.

4. Nozzle. Be sure to remember to press the "nozzle cleaning" button. At this time, water will overflow around the nozzle. Remember to pull out the nozzle with your hand and hold it tightly so that the nozzle can clean the pipe head. At the same time, use some soft cloth dipped in water to clean it. After cleaning, press the stop button, and the water will stop spraying.

5. Clean the deodorizing box and deodorizing air inlet. If there is odor, you need to replace the deodorizer; if there is dust on the deodorizing box and the deodorizing air inlet, it will reduce the air volume, so remember to use a toothbrush or a small brush to clean it.

The above is the smart toilet cleaning method that the editor shared with everyone. Friends in need can learn about it. I hope it can help everyone.