How to reduce bacterial growth in drum washing machines? When should disinfectant be added to drum washing machines?

The washing machine should be placed in a well-ventilated location at home to reduce the growth of bacteria. Clothes that are not being washed should be placed in a laundry basket with holes and ventilation, and should not be thrown directly into the washing machine. Wet clothes that have been rained on or sweated a lot should not be piled together to avoid dampness and mold. During use, we should regularly add disinfectant for disinfection and cleaning. Nowadays, cleaning is simple and convenient. Just add a special dirt remover for the washing machine and perform the relevant operations in proportion. The following is a detailed introduction on this aspect from Encyclopedia Knowledge Network. Let's take a look.

Contents of this article

1. How to clean a drum washing machine without disassembling it

2. How to reduce bacterial growth in drum washing machines

3. When should the disinfectant be added to the drum washing machine?

How to clean a drum washing machine without disassembling it

1. Prepare the descaling agent and mix it with water in a ratio of 1:2 and stir well.

2. Remove the drain pipe of the drum washing machine, empty the drum, and close the water inlet valve and hatch.

3. Open the detergent adding box and pour the prepared descaling solution into the detergent adding box, being careful not to splash it on your eyes and skin.

4. Press the power switch of the washing machine and turn the program controller to the washing program. At this time, the descaling agent will flow from the drain pipe into the prepared bucket. After the descaling liquid in the bucket is basically drained, pour the descaling liquid in the bucket from the detergent adding box. Repeat this several times until the program is completed, and open the filter to clean the filter.

5. Open the water inlet valve, restore the drain pipe to its original position, reselect the washing program, run the washing tub again, rinse the washing tub with clean water, and clean the filter again after the program is finished. At this point, the dirt in the washing machine drum is basically removed.

6. When cleaning the filter, first remove the filter from the water inlet valve, use a brush to remove the dirt on the filter, rinse it with clean water, and then insert it into the water inlet valve. The filter should be cleaned regularly to avoid too much dirt affecting cleaning.

How to reduce bacterial growth in drum washing machines

1. The washing machine should be placed in a well-ventilated location at home. If the location is not well-ventilated, it is recommended to use an electric fan to dry the washing tub after use.

2. Clothes that are not being washed should be placed in a laundry basket with holes for ventilation, not directly in the washing machine. Wet clothes that have been wet from rain or heavy sweating should not be piled together to avoid dampness and mold growth.

3. When washing clothes, do not put too much detergent to avoid detergent residue on the clothes or in the washing tub, causing contamination.

4. After washing and dehydrating the clothes, they should be taken out and dried as soon as possible to avoid leaving the clothes in the washing tub for a long time. The dampness will not only produce odor, but also easily breed bacteria and mold.

5. After washing clothes each time, it is best to remove the filter in the washing machine, remove lint and debris, and wash and dry them.

6. After washing clothes, open the washing machine for ventilation for at least 1 hour, or use the drying function to dry the inside of the washing tub, and then cover it.

When should I put disinfectant in the drum washing machine?

It is best to put disinfectant in the drum washing machine after the first dehydration. The drum generally has a main water inlet and a secondary water inlet. The main water inlet is mainly used to pour out clothes, detergent, etc., and the secondary water inlet is mainly used to pour softener and the like. If you think the main water inlet is not suitable, you can pour it in the secondary water inlet.

Drum washing machines originated in Europe. The washing method is designed to imitate the principle of a hammer hitting clothes. Drum washing machines are composed of a stainless steel inner drum, a mechanical program controller, a triple-protected outer shell that has been phosphated, electrophoresed, and sprayed, and several heavy cement blocks to balance the huge centrifugal force generated by the drum's rotation for repeated movements. The combined effect of detergent and water makes the clothes clean.