If one tire is different from the other three, does it need to be replaced? What pattern of tire should I choose for a family car?

We all know that car tires must be replaced with the same model, type and specification. They cannot be replaced randomly. In fact, the tire pattern is also the same. It must be the same on all four wheels so as not to affect normal driving. Let's learn more about it.

If one tire is different from the other three, does it have to be replaced?

It is best if the patterns and brands on the front wheels and axles are the same. Even if they are different, they should be similar so that you can tell the difference at a glance. This is not allowed. It may affect the steering and driving of the front wheels, and some of the effects can be clearly felt on the steering wheel. Severe cases can lead to tire wear and deviation in positioning data.

Maybe you only had one tire flat, but you were reluctant to replace two because it was expensive, or there might be other reasons. If you have a front-wheel drive car, it is best to replace another new tire and match it with one of the new front tires. If both front wheels are not new tires, replace the two rear tires with the front wheels.

What pattern of tires should I choose for my family car?

When buying tires for family cars, you should first consider the brand and price range, and choose the pattern within this range. Different brands have differences in patterns and performance.

Different patterns of the same brand also have different characteristics. When choosing tires for family cars, emphasis should be placed on quietness, comfort, and handling and braking performance in dry and wet areas. Wear resistance is not the key point. You should choose tires with softer rubber, relatively small tread blocks, and fine pattern gaps. Such tires are more comfortable.

It is not recommended to choose sports patterns. Such patterns focus on control, have low wear resistance, and produce loud tire noise, making them unsuitable for home use. It is also not recommended to choose high-wear-resistant tires. The rubber of such tires is too hard, the grip is insufficient, and the tire noise is loud. When choosing tires, it is best to read the introduction of each model, which will have the focus.

Can car tires have the same pattern but different brands?

First of all, if you can find tires with the same pattern but different brands, you can definitely change them.

However, you should know that if the original tires of your car have good quiet performance, then if one of the tires is replaced with another brand or another pattern, this balance will be broken and the noise will be significantly increased. Of course, the premise is that your car does have good sound insulation performance, otherwise the difference is really not big.

The two tires on the same axle are actually uneven because one is new and the other is old. Although you can't see or feel it, the depth of the pattern is indeed different, so the new tire will naturally wear unevenly. In other words, its life is reduced quickly and it is easy to wear unevenly. As for braking performance and drainage performance, the changes that a tire can make are indeed very limited.

Dynamic balancing must be done. If conditions permit, it is best to ask the store to check the four-wheel alignment for you. If there is deviation, adjust it. Of course, some car models cannot be adjusted at the rear, so don't touch it if it doesn't exist.

When replacing tires, be careful not to mix tires of different types, models, patterns and carcass structures on the same vehicle. Tires on the same axle should also be prevented from being mixed. If you want to replace the tire on one side, you must also replace the tire on the other side at the same time.