How to choose a shower head? How to install a shower head

In our lives, shower heads look like inconspicuous items, but they contribute their energy and heat to people's health and comfort every day. Because choosing a good shower head is very important! As long as you master the following shower head purchasing skills, I believe you can definitely buy a satisfactory shower head. The following is an introduction to what to pay attention to when choosing a home shower head. In fact, choosing a shower head seems to be a trivial matter, but there is a lot of knowledge in it.

Contents of this article

1. How to choose a shower head

2. How to install a shower head

3. What should I pay attention to when choosing a household shower head?

How to choose a shower head

1. Check the spray effect. You can check the spray effect when buying. A good shower head can ensure that each tiny spray hole sprays evenly and consistently, and can ensure a refreshing shower effect under different water pressures. When choosing, you can test the water to see if the spray water flow is uniform.

2. Look at the spray mode. You can look at the spray mode. Shower heads can be divided into natural and pleasant rain type, energetic massage type, comfortable and warm spray type, refreshing and soft water column type, and water-saving drip type.

3. Check the surface coating. The quality of the coating on the shower head will affect its quality and service life. A good coating can be kept at a high temperature of 150°C for 1 hour without bubbling or wrinkling. When selecting, you can check its glossiness and smoothness. A bright and smooth shower head indicates that the coating is uniform and the quality of the shower head will be better.

As long as you master the above shower head purchasing skills, I believe you can buy a satisfactory shower head.

How to install a shower head

How to install a shower head? I believe many friends at home are very interested in this. Let me share with you below, hoping it can help you.

Place a rubber gasket on one end of the pipe.

Tighten the connection between the pipe and the water inlet pipe.

Connect the shower head to the pipe.

When connecting, remember to put the rubber pad on the connection.

After the installation is complete, turn on the shower head switch, check if there are any problems, and then you can use it.

What to pay attention to when choosing a home shower head

1. Whether the spray holes are uniform. A high-quality shower head can ensure that the amount of water distributed by each spray hole is uniform, so when choosing a shower head, you should first consider the water flow. Water saving is also a key point in purchasing. Some shower heads use steel ball valve cores, which can adjust the hot water so that the hot water can flow out quickly and accurately. This type of shower head saves about 50% water compared to ordinary shower heads.

2. Tilt the water out. When choosing, you can tilt the shower head to let the water out. If the water outflow from the topmost spray hole is small or not at all, it proves that the internal design is not very good. Even if there are multiple water outflow methods, it will be more comfortable to use.

3. Check the shower head. High-quality shower heads often protrude from the outside, making them easier to clean. Or the shower head is made of silicone. When cleaning, you can just wipe it lightly with a rag to remove the scale deposited on the shower head.